Dugan Hall Conference Room

Owned by Nathan Johnson
Last updated: Feb 26, 2024Version comment
1 min read
Equipment
Room Features
• SMART Board Interactive Whiteboard (click here for more info) 
• LCD projector
• Ability to connect a presenter's laptop - VGA

• Maximum Capacity 12
• Conference Tables and Chairs
• Light switches by door
• Internet and network access
• Phone

Powering Up the Equipment
The projector is controlled with the SMART control panel located on the bottom right of the SMART Board.  Press the Power button to turn the projector on, then allow the projector time to warm up (approximately 30 seconds). 

Volume

The room audio level is adjusted by using the Volume Knob located on the SMART Board’s right speaker.  In addition, computer volume is controlled by the laptop or desktop.  In Windows, to the right side of the start bar, is a volume widget.  Clicking here will allow the volume level to be adjusted up, down, or muted.

Connecting a Laptop

  1. Plug the VGA cable into your laptop's VGA port.  If your laptop does not have a VGA port, click on Laptop/Tablet Display Adapters to find out what type of adapter is needed to connect your laptop.
  2. Press the COMPUTER 2 button on the SMART control panel located in the equipment rack.
  3. If needed, set your laptop to display on a secondary display.

Powering Down the Equipment

To turn off the projector, press the Power button on the SMART control panel twice.

Below is the projection guide for Dugan Hall Conference Room.