| Equipment | Room Features | |
| • Crestron Touch Panel Interface • 60" LCD TV • Blu-ray player • Ability to connect a presenter's laptop VGA & HDMI • Auxiliary input (composite video/audio) | • Seats 12 |
Powering Up the Equipment
The equipment is controlled from the conference table using a Crestron Touch Panel.
| Click on the image below to zoom | Click on the image below to zoom |
 |  |
| Conference table | Crestron Touch Panel |
If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).
 |  |
After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...TV Powering On." Once the LCD TV is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.
 |
Projector Standby (PIC-MUTE)
Each source page (Podium Laptop, etc.) has a Television Standby button located in the lower left corner of the screen. Pressing this button once will place the LCD TV in standby or pic-mute mode. While this mode is active, the button will flash. Simply press the button again to take the LCD TV out of standby mode.
Volume
Each source page (Podium Laptop, Blu-ray, etc.) has a volume control section located on the right side of the screen. Volume up, down, and mute controls are provided.
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Blu-ray or DVD Playback (via Blu-ray player)
The disc tray on the Blu-ray player in this room is not functioning properly. It is strongly recommended that you do not use the Blu-ray player, as it's possible your disc will become stuck in the player.
Connecting a Laptop
The cables needed for connecting a laptop computer are found on the conference table.
| Using the VGA cable | Using the HDMI cable |
| 1. Plug the VGA cable into your laptop's VGA port. | 1. Plug the HDMI cable into your laptop's HDMI port. |
| 2. Plug the Ethernet cable into your laptop's network jack (if needed). | 2. Plug the Ethernet cable into your laptop's network jack (if needed). |
| 3. Plug the audio cable into your laptop's headphone jack. | 3. Press the LAPTOP button on the Crestron to view the "Podium Laptop" screen. |
| 4. Press the LAPTOP button on the Crestron to view the "Podium Laptop" screen. | 4. Press the "Digital (HDMI) Laptop" touch-button. |
| 5. Press the "Analog (VGA) Laptop" touch-button. | 5. Turn on your laptop's power. |
| 6. Turn on your laptop's power. | 6. If needed, set your laptop to display on a secondary display. |
| 7. If needed, set your laptop to display on a secondary display. |
| Click on the image below to zoom |
 |
Don't have a VGA or HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
Auxiliary Video Input
Use the external Audio/Video cables located by the rack to display images from a portable VHS VCR or other external device; composite audio/video cables are provided.
After connecting your device with the appropriate cables, press the AUX button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom |
 |
Powering Down the Equipment
Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the "Yes, Shutdown" button to proceed with shutdown or the "No, Go Back" button to cancel.
 |  |