Health Science 111 - Level 3 Classroom - Seats 45
• Crestron - Extron Hard-Button Control Panel
|
• - Ceiling-mounted LCD projector
|
• • click for • VHS VCR• • DVD player- Ability to connect a presenter's laptop (HDMI)
|
• - Pull-down projection screen
|
| • • - Tablet arm desks (movable)
|
• Light - Light switches by door & behind lectern
|
• - Internet and network access
|
• - Phone (wall-mounted behind lectern)
|
•
Powering Up the Equipment
The equipment is controlled from the lectern using a white multi-button Crestron Control Panel.
Press the green ROOM START UP On button on the Crestronthe Extron. After pressing ROOM START UP, wait 30 seconds before selecting the desired source button on the Crestron. The projector will not receive the command to switch until after it has finished warming ON, the button will blink red for 10 seconds while the projector turns on and warms up.
The resident computer and document camera are powered on using the appropriate button located on each device.
Projector Standby (PIC-MUTE)
Press the PROJ STBY MUTE button on the Crestron once the Extron once to place the projector in standby mode. Simply press the button again to take the projector out of standby.
Volume
The adjustment of volume is done using the Volume knob located on the wall behind the instructor’s lectern.in the lower-left corner of the Extron.
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. HS 111 is 111 is equipped with a HP computerDell PC computer. USB ports are located next to the computer's power button.
Once the computer has been powered up, press the yellow COMP PC button on the Crestron to the Extron to display the image computer on both the projector and monitor and LCD projector simultaneously.
| Click on the image below to zoom |
Image Removed Image Added
|
The computer is located on
the right shelf of the lectern |
Document Camera Camera (ELMO)
The Doc Cam’s Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.
Once the camera's power is on, press the yellow DOC CAM button on the Crestron to the Extron to display the image on both the monitor and LCD projector simultaneously.
DVD Playback (via the DVD player)
Once the equipment is powered up, press the OPEN/CLOSE button on the DVD player and insert your disc into the disc tray. Press the yellow DVD/CD button on the Crestron to display the image on the LCD projector.
| Click on the image below to zoom |
 Image Removed
|
| The DVD player is in the rack |
Hard-buttons are provided which allow you to control the DVD player from the Crestron. The second row of buttons is for playback control, while DVD menu navigation is handled with the arrow buttons located beneath the playback buttons. The only time you ever touch the DVD player itself is to insert or eject your disc.VHS Playback (via the VCR)
Once the equipment is powered up, insert your tape into the VCR. Press the yellow VCR button on the Crestron to display the image on the LCD projector.
| Click on the image below to zoom |
 Image Removed
|
| The VCR is in the rack |
Hard-buttons are provided which allow you to control the VCR from the Crestron. The second row of buttons is for playback control. The only time you ever touch the VCR itself is to insert or eject your discand monitor.
 Image Added
|
| The document camera is located on the left of the instructor's lectern. |
Connecting a Laptop
The cables HDMI cable needed for connecting a laptop computer are is found on the instructor’s lectern. In addition to cables for connecting a laptop, a power outlet is also located on the lectern for your convenienceinstructor's podium. The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output.
Don't have a VGA an HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
Powering Down the Equipment
Just below the green ROOM START UP button is a red ROOM SHUT DN button. Press it to turn off the LCD projector.Press the OFF button on the Extron to shut down the projector.
The resident computer and document camera must be are each powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
in the lower-left corner).
2. Click the "Shut Down" button.
