Page Comparison

Health Science 111 - Level 3 Classroom - Seats 45

Powering Up the Equipment
The equipment is controlled from the lectern using a white multi-button Crestron Control Panel. 

Click on the image below to zoom

 

Click on the image below to zoom

Image Removed

Image Added

 

Image Added

Image Removed

Instructor's lectern

 Crestron

Extron Control Panel

Press the green ROOM START UP On button on the Crestronthe Extron. After pressing ROOM START UP, wait 30 seconds before selecting the desired source button on the Crestron. The projector will not receive the command to switch until after it has finished warming ON, the button will blink red for 10 seconds while the projector turns on and warms up.

The resident computer and document camera are powered on using the appropriate button located on each device.

Projector Standby (PIC-MUTE)
Press the PROJ STBY MUTE button on the Crestron once the Extron once to place the projector in standby mode. Simply press the button again to take the projector out of standby.

Volume

The adjustment of volume is done using the Volume knob located on the wall behind the instructor’s lectern.in the lower-left corner of the Extron. 

NOTE: Computers have their own volume controls which may need to be adjusted separately.

Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. HS 111 is 111 is equipped with a HP computerDell PC computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the yellow COMP PC button on the Crestron to the Extron to display the image computer on both the projector and monitor and LCD projector simultaneously.

Click on the image below to zoom

Image Removed

Image Added

The computer is located on the right shelf of the lectern

Document  Camera Camera (ELMO)
The Doc Cam’s Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the yellow DOC CAM button on the Crestron to the Extron to display the image on both the monitor and LCD projector simultaneously.

DVD Playback (via the DVD player)
Once the equipment is powered up, press the OPEN/CLOSE button on the DVD player and insert your disc into the disc tray. Press the yellow DVD/CD button on the Crestron to display the image on the LCD projector.

VHS Playback (via the VCR)
Once the equipment is powered up, insert your tape into the VCR. Press the yellow VCR button on the Crestron to display the image on the LCD projector.

Hard-buttons are provided which allow you to control the VCR from the Crestron. The second row of buttons is for playback control. The only time you ever touch the VCR itself is to insert or eject your discand monitor.

Connecting a Laptop
The cables HDMI cable needed for connecting a laptop computer are is found on the instructor’s lectern. In addition to cables for connecting a laptop, a power outlet is also located on the lectern for your convenienceinstructor's podium.  The HDMI connection caries both video and audio.  For more information see Selecting HDMI Audio Output.

Don't have a VGA an HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.

Powering Down the Equipment
Just below the green ROOM START UP button is a red ROOM SHUT DN button. Press it to turn off the LCD projector.Press the OFF button on the Extron to shut down the projector. 

The resident computer and document camera must be are each powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting down.
Image Removed Image Removed Image Removed

Image Removed

 Powering Down the Resident Computer

1. Open the Start Menu (click on  in the lower-left corner).

2. Click the "Shut Down" button.