Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

ELMO P10 WXGA Visual PresenterMinimizeMaximizeRemove

Locations
The ELMO P10 WXGA Visual Presenter is found in the following locations:

  • Health Science 206, 214
  • Lyons Hall 122, 309, 312, 313
  • Old Main 104, 205, 214, 220, 221, 224, 225, 300, 301, 310, 400, 403, 408
  • Science Hall 036, 1008, 1013A, 1013B, 1028, 1053
     

Using the Document Camera
Start the room up as you would normally and select the appropriate source button to display the document camera. Use the What's In My Classroom? page to find the instructions for your particular classroom.

     

POWER: The POWER switch (1) is located on the right-side of the document camera near the back.

ZOOM: Use the dial (2), located on the right-side of the document camera near the front, to zoom in & out on the subject placed on the document camera's stage.

FOCUS: After you have zoomed in/out on the image, press the AF (Auto Focus) button, which is located in the center of the zoom dial.

     

LIGHTING: To turn the document camera's lamp on or off, press the  button (3). This button is found to the left of the zoom dial.

IRIS: Iris controls allow you to brighten or darken the document camera image. Pressing the UP arrow button will brighten the image, while pressing the DOWN arrow button will darken it (4). These buttons are located beneath the  button.

  • No labels