Photos
| Click on any image below to zoom |
|
| HS 220 seats 18 students. |
|
| HS 220 is equipped with one whiteboard. |
|
| Lighting controls are located next to the door. |
|
| A phone is located on the lectern. |
Health Science 220 - Level 3 Classroom - Seats 40
| Equipment | Room Features |
| • Seats 40 18 |
Powering Up the Equipment
The ceiling-mounted LCD projector is controlled using the EPSON remote control.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| Instructor's lectern | EPSON remote control |
Press the POWER ON button to turn on the LCD projector. After pressing ON, wait until the projector has warmed up before selecting the desired source button on the EPSON control. The projector will not receive the command to switch until after it has finished warming up.
The resident computer, and document camera, are powered on using the appropriate button located on each device.
Projector Standby (PIC-MUTE)
Press the A/V MUTE button on the EPSON remote control once to place the projector in standby mode. Simply press the button again to take the projector out of standby.
Volume
If not already on, press the POWER button on the amplifier to turn it on. The adjustment of volume, however, is actually done using the knob located on the top of the lectern.
| Click on the image below to zoom |
|
| The amplifier is located at the bottom of the rack |
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. HS 220 is equipped with a HP computer. USB ports are located next to the computer's power button.
Once the computer has been powered up, press the COMPUTER button on the EPSON remote control until the projector is set to COMPUTER 1 mode to display the image on both the monitor and LCD projector simultaneously.
| Click on the image below to zoom |
|
| The computer is located on the left shelf inside the lectern |
NOTE: The document camera and laptop must be powered off in order to see the resident computer image.
Document Camera (ELMO)
The Doc Cam’s power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.
Once the camera's power is on, press the COMPUTER button on the EPSON remote control until the projector is set to COMPUTER 1 mode to display the image on both the monitor and LCD projector simultaneously.
Connecting a Laptop
The HDMI cable needed for connecting a laptop computer is found on the instructor's podium. The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output.
| Using the HDMI cable |
|
| 1. Plug the HDMI cable into your laptop's HDMI port. |
|
| 2. Plug the Ethernet cable into your laptop's network jack (if needed). |
| 3. Press the HDMI button on the EPSON control panel to toggle the projector is set to HDMI 2 mode. |
| 5. Turn on your laptop's power. |
| 6. If needed, set your laptop to display on a secondary display. |
Don't have a VGA port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
Powering Down the Equipment
Press the POWER button twice on the EPSON remote control to turn off the LCD projector. The resident computer, document camera, and DVD/VCR combo unit must be powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
2. Click the "Shut Down" button.