What does SCALE-UP stand for?
SCALE-UP stands for Student-Centered Active Learning Environment for Undergraduate Programs. The technology installed in SH 1053 was inspired partly by this initiative. More information can be found online at the SCALE-UP website.
RoomNo Optical Drive on Mac
Please Note: This room's Mac does NOT have a DVD drive. If you are planning on playing a DVD, CD, etc. you will need to use the room's DVD or Blu-ray player.
Need to access files saved on a DVD from the computer? You can arrange for use of a portable optical drive by contacting the ITS Help Desk at ext. 8340.
Staff can also provide assistance outside of class time with moving files off a disc to D2L, Google Drive, etc. so you can access the files without needing to use a portable optical drive.
Room Use Policy
Please read the SH 1053 Room Use Policy (PDF) for more information regarding room setup, etiquette, room access, etc.
Photos
| Click on any image below to zoom |
|
| SH 1053 seats 14 students. |
|
| SH 1053 is equipped with threeLCD TV carts for student collaboration. |
|
| Lighting controls, along with a phone, are located next to the door. |
|
| Additional lighting controls, are located in the front corner. |
Possible Room Configurations
| Click on any image below to zoom |
|
| Configuration for three groups of sixusing the LCD TV carts. Seats 18. |
|
| Configuration for five groups of six not using the LCD TV carts. Seats 30. |
|
| Configuration for three groups of eight using the LCD TV carts with spare seating. Seats 30. |
|
| Configuration for three groups of eight using the LCD TV carts. Seats 24. |
|
| Configuration for three groups of ten using the LCD TV carts. Seats 30. |
Using the Floor Pockets
| Click on any image below to zoom |
|
| Additional electrical outlets can be found inside the floor pockets located on the floor of the room. |
|
| Pull up on the handle to unlatch the cover. |
|
| Pull open the cover fully to access the inside of the floor pocket. |
|
| Plug the power cord for your device into one of the available electrical outlets. |
|
| A sliding door is located on either side of the floor pocket cover. |
|
Slide the door clockwise to open it. This |
|
To ensure that the cover closes flush, |
|
| Floor pocket closed properly with a power cord connected. |
Science Hall 1053 (SCALE-UP Room) - Level 5 Classroom - Seats 1430
| Equipment | Room Features |
|
|
Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch Panel Interface.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| Instructor's lectern | Crestron Touch Panel |
If the If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter on the required Access Code (63520)page press Enter. No code is required.
|
|
After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.
|
|
The resident computer, document camera, and Blu-ray player are powered on using the appropriate button located on each device.
Projector Standby (PIC-MUTE)
Each source page (COMPUTER, LAPTOP, CART A, CART B, etc.) has a Projector Standby button located in the lower left corner of the screen. Pressing this button once will place the projector in standby or pic-mute mode. While this mode is active, the button will flash. Simply press the button again to take the projector out of standby mode.
Volume
Each source page (COMPUTER, LAPTOP, CART A, CART B, etc.) has a volume control section located on the right side of the screen. Volume up, down, and mute controls are provided.
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Projection Screen
Press the SCREEN button on the Crestron to display the appropriate touch-screen controls. Up, down and stop buttons are provided.
| Click on the image below to zoom |
|
A wall plate, found beneath the whiteboard tray behind the lectern, can also be used to control the screen.
Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. SH 1053 is equipped with a rack mounted Mac Mini computer. Both the Mac and Windows operating systems can be used. Simply select the desired operating system at startup. Two USB ports (located next to the Crestron and next to the computer's power button) are available.
Once the computer has been powered up, press the MAC (Computer) button on the Crestron to display the appropriate touch-screen controls. In addition to displaying the image on the projector, a "Send To Carts" touch-button is provided which allows you to display the image on the LCD TVs of the three student collaboration carts.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The computer is located in the rack |
Document Camera
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.
Once the camera's power is on, press the DOC CAM button on the Crestron to display the appropriate touch-screen controls. In addition to displaying the image on the projector, a "Send To Carts" touch-button is provided which allows you to display the image on the LCD TVs of the three student collaboration carts.
| Click on the image below to zoom |
|
Blu-ray or DVD Playback (via the Blu-ray player)
Press the OPEN/CLOSE button on the The Blu-ray player and insert your disc (DVD or Blu-ray) into the disc tray. Press the BLU-RAY button on the Crestron to display the appropriate touch-screen controls. Ray player is not functional at this time. For assistance call the Media Center at x2590.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The Blu-ray player is in the rack |
Touch-buttons are provided which allow you to control the Blu-ray player from the Crestron. The only time you ever touch the Blu-ray player itself is to insert or eject your disc.
In addition to displaying the image on the projector, a "Send To Carts" touch-button is provided which allows you to display the image on the LCD TVs of the three student collaboration carts.
Connecting a Laptop
The cables needed for connecting a laptop computer are found on the instructor's lectern. The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output. In addition to cables for connecting a laptop, a power outlet is also located on the lectern for your convenience.
| Using the HDMI cable | Using the VGA cable |
|
|
| 1. Plug the HDMI cable into your laptop's HDMI port.* | 1. Plug the VGA cable into your laptop's VGA port. |
|
|
2. Plug the Ethernet cable into your laptop's network jack (if needed). | 2. Plug the Ethernet cable into your laptop's network jack (if needed). |
| |
| 3. Press the LAPTOP button on the Crestron to view the "Podium Laptop" screen. | 3. Plug the audio cable into your laptop's headphone jack. |
| 4. Press the "Digital (HDMI) Laptop" touch-button. | 4. Press the LAPTOP button on the Crestron to view the "Podium Laptop" screen. |
| 5. Turn on your laptop's power. | 5. Press the "Analog (VGA) Laptop" touch-button. |
| 6. If needed, set your laptop to display on a secondary display. | 6. Turn on your laptop's power. |
| 7. If needed, set your laptop to display on a secondary display. |
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The adapter assembly is attached to the lectern's HDMI cable |
*Don't have an HDMI port on your laptop? An An adapter assembly is provided for use with the lectern's HDMI cable so that devices with DVI, DisplayPort, Mini DisplayPort, Micro HDMI, and Mini HDMI can be connected.
Carts A, B, and C (Control from the Carts)
The equipment is controlled from the cart using a black multi-button Crestron Control Panel.
The cables needed for connecting a laptop computer are found at each cart; four VGA cables (with audio) and one HDMI cable are provided.
Pressing DISPLAY OFF on the Crestron will turn off that cart's LCD TV.
*The audio cables associated with each VGA cable only need to be connected if a faculty member is displaying a student's laptop on the LCD projector for the class to view, as any accompanying audio would then be heard through the room's ceiling speakers. If audio playback when working in groups is desired, students must use the built-in speakers on their laptops.
Carts A, B, and C (Control from the Lectern)
Press the CART A, CART B, or CART C button on the Crestron to display the appropriate touch-screen controls.
Once the button is pressed, the currently selected student laptop at the selected cart will then display on the LCD projector and the audio from that laptop will play through the room's ceiling speakers. In addition to displaying the image on the projector, a "Send To Carts" touch-button is provided which allows you to display that image on the LCD TVs of the other two student collaboration carts.
Pressing the "Stop Sending To Carts" touch-button will blank out the image on the LCD TVs of Carts A, B, and C, but the image will remain on the projector. Power ON and OFF touch-buttons are also provided for control of the selected cart's LCD TV Visit Training & Support to find out what type of adapter is needed to connect your laptop.
Powering Down the Equipment
Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the "Yes, Shutdown" button to proceed with shutdown or the "No, Go Back" button to cancel.
|
|
The resident computer, document camera, and Blu-ray player are each powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Apple Menu (click on 
2. A dialog box will appear. Click the "Shut Down" button in the dialog box.