Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updated some images.

...

...


Click on any image below to zoom
 

Image Added

KC G20 seats 40 students.

Image Added

KC G20 is equipped with one whiteboard.

Image Added

A phone is located in the hallway outside the room.

 


Koessler Athletic Center G20 - Level 3 Classroom - Seats 40MinimizeImage AddedMaximizeImage AddedRemoveImage Added

EquipmentRoom Features
  • Extron Control Panel
  • Wall-mounted flat panel display
  • Windows computer
  • Document camera (click here for more info)
  • Blu-Ray player with remote control
  • Ability to connect a presenter's laptop (HDMI
  • Seats 40
  • Tablet arm desks (movable)
  • Light switches by door & behind lectern
  • Internet and network access
  • Phone (wall-mounted in hallway)
  • Whiteboard (front wall)

Powering Up the Equipment
The wall-mounted display is controlled from the lectern using an Extron Control Panel.  

Click on the image below to zoomClick on the image below to zoom

Image Added

Image Added

Instructor's lecternExtron Control Panel


Press the ON button to turn on the flat panel. After pressing ON, the button will flash red until it has finished warming up.  Sources can be switched while the display is warming up.

The resident computer, document camera, and Blu-Ray player are all powered on using the appropriate button located on each device.


Projector Standby (AV MUTE)
The LCD panel does not support an AV Mute function.  To blank the image on the display, turn the panel off using the OFF button on the  Extron Hard-Button Control Panel.  Press the ON button on the Extron Hard-Button Control Panel to turn the panel back on.  Turning the panel on or off takes approximately 5 seconds.


Volume
The adjustment of volume is done using the Volume knob located in the lower-left corner of the Extron.  The lights to the left of the knob indicate the relative volume for the room.


NOTE: Computers have their own volume controls which may need to be adjusted separately.


Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. KC G20 is equipped with a rack-mounted Dell computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the PC button on the Extron to display the image on both the monitor and display  projector simultaneously.

Click on the image below to zoom

Image Added

The computer is located in the rack.



Document Camera (ELMO)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the DOC CAM button on the Extron to display the image on both the monitor and LCD projector simultaneously.


Blu-ray or DVD Playback
The power button for the Blu-Ray player is located on the left of the unit above the SONY logo.  It can also be powered on with the power button on the Sony remote control.  Once the player is powered up, insert your disc into the SONY DVD player. The unit is controlled using the corresponding SONY remote control provided.

Click on the image below to zoomClick on the image below to zoom

Image Added

Image Added

The Blu-Ray plater is in the rack.Sony Blu-Ray remote.


Press the BLU-RAY button on the Extron to display the Blu-Ray player image on the wall-mounted flat panel and monitor.


Connecting a Laptop

The HDMI cable needed for connecting a laptop computer is found on the instructor's podium.  The HDMI connection caries both video and audio.  For more information see Selecting HDMI Audio Output.  Tethered to the HDMI cable is a display port adaptor that you can use if necessary.

Using the HDMI cable
1.Plug the HDMI cable into your laptop's VGA port.

Image Added

2. Press the HDMI button on the Extron Control Panel.
3. Turn on your laptop's power.
4. If needed, set your laptop to display on a secondary display.

Don't have a HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.


Powering Down the Equipment
Press the OFF button on the Extron to turn off the flat panel display.

The 
resident computer, document camera, and DVD/VCR combo unit must be powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.


Powering Down the Resident ComputerMinimizeImage AddedMaximizeImage AddedRemoveImage Added

1. Open the Start Menu (click on Image Added in the lower-left corner).

2. Click the "Shut Down" button.