OM 210
- Pamela Dart
- Nathan Johnson
No Optical Drive on PC
Please Note: This room's PC does NOT have a DVD drive. If you are planning on playing a DVD, CD, etc. you will need to use the room's DVD or Blu-ray player.
Need to access files saved on a DVD from the computer? You can arrange for use of a portable optical drive by contacting the ITS Help Desk at ext. 8340.
Staff can also provide assistance outside of class time with moving files off a disc to D2L, Google Drive, etc. so you can access the files without needing to use a portable optical drive.
Photos
| Click on any image below to zoom |
|
| OM 210 seats 28 students. |
|
| OM 210 is equipped with one chalkboard. |
|
| Lighting controls are located next to the door. |
|
| Additional lighting controls, along with a phone, are located on the wall behind the lectern. |
Old Main 210 - Level 3 Classroom - Seats 28
| Equipment | Room Features |
|
|
Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch Panel Interface.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| Instructor's lectern | Crestron Touch Panel |
If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).
|
|
After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.
|
|
The resident computer and document camera are powered on using the appropriate button located on each device.
Projector Standby (PIC-MUTE)
Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, BLU-RAY, DVD, VCR, & AUX) has a Projector Standby button located in the lower left corner of the screen. Pressing this button once will place the projector in standby or pic-mute mode. While this mode is active, the button will flash. Simply press the button again to take the projector out of standby mode.
Volume
Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, BLU-RAY, DVD, VCR, & AUX) has a volume control section located on the right side of the screen. Volume up, down, and mute controls are provided.
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. OM 210 is equipped with a HP computer. USB ports are located next to the computer's power button.
Once the computer has been powered up, press the COMPUTER button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The computer is located on the right shelf of the lectern |
Document Camera (ELMO)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.
Once the camera's power is on, press the DOC CAM button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom |
|
Blu-ray or DVD Playback (via the Blu-ray player)
Press the OPEN/CLOSE button on the Blu-ray player and insert your disc (Blu-ray or DVD) into the disc tray. Press the BLU-RAY button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The Blu-ray player is in the rack |
Touch-buttons are provided which allow you to control the Blu-ray player from the Crestron. The only time you ever touch the combo unit itself is to insert or eject your disc.
DVD Playback (via the DVD player)
Press the OPEN/CLOSE button on the DVD player and insert your disc (DVD) into the disc tray. Press the DVD button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The DVD player is in the rack |
Touch-buttons are provided which allow you to control the DVD player from the Crestron. The only time you ever touch the combo unit itself is to insert or eject your disc.
VHS Playback (via the VCR)
Simply insert your tape into the VCR and press the VCR button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom | Click on the image below to zoom |
|
|
| The VCR is in the rack |
Touch-buttons are provided which allow you to control the VCR from the Crestron. The only time you ever touch the combo unit itself is to insert or eject your tape.
Connecting a Laptop
The cables needed for connecting a laptop computer are found on the instructor's lectern (under the hatch). In addition to cables for connecting a laptop, a power outlet is also located under the hatch for your convenience.
| Using the VGA cable |
|
| 1. Plug the VGA cable into your laptop's VGA port. |
|
| 2. Plug the Ethernet cable into your laptop's network jack (if needed). |
|
| 3. Plug the audio cable into your laptop's headphone jack. |
| 4. Press the LAPTOP button on the Crestron to view the "Laptop" screen. |
| 5. Turn on your laptop's power. |
| 6. If needed, set your laptop to display on a secondary display. |
| Click on the image below to zoom |
|
Don't have a VGA port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
Auxiliary Video Inputs
Use the external Audio/Video cables located on the instructor's lectern (under the hatch) to display images from a video camera or other external device; component and composite audio/video cables are provided.
After connecting your device with the appropriate cables, press the AUX button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom |
|
Touch-buttons are provided which allow you to select your external device for playback in the room.
Powering Down the Equipment
Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the green "YES" button to proceed with shutdown or the red "NO" button to cancel.
|
|
The resident computer and document camera are each powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
2. Click the "Shut Down" button.