Click on any image below to zoom
KC 201 seats 46 students.
KC 201 is equipped with one whiteboard.
Lighting controls, along with a phone,
are located next to the door.
Additional lighting controls, along with screen
controls, are located behind the lectern.
Koessler Athletic Center 201 (Griffin Team Meeting Room) - Level 2 Classroom - Seats 46
| Equipment | Room Features | |
| • Seats 46 |
Powering Up the Equipment
The ceiling-mounted LCD projector is controlled using the Panasonic remote control located on the lectern.
| Click on the image below to zoom | Click on the image below to zoom | |
|
|
|
| Instructor's lectern | Motorized screen controls | Panasonic Remote |
Press the Power button to turn on the LCD projector. After pressing ON, wait until the Panasonic logo has disappeared for the projector to be ready. To lower the projection screen press the down arrow on the wall mounted screen controls.
Projector Standby (AV MUTE)
To mute the image on the projector, press the MUTE 6 button on the rightt of the Panasonic remote control. Pressing this button once will place the projector in standby or (pic-mute mode). Simply press the button again to take the projector out of standby mode.
Volume
The adjustment of volume is done using the VOL + and VOL - buttons on the Panasonic remote.
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Projection Screen
Screen up, down, and stop buttons are located on the wall plate behind the lectern for manual control of the screen.
Connecting a Laptop
The HDMI and USB cables needed for connecting a laptop computer are found on the instructor's lectern (under the hatch). The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output. In addition to cables for connecting a laptop, power outlets are also located under the hatch for your convenience.
| Using the HDMI cable |
| 1. Plug the HDMI cable into your laptop's HDMI port. |
|
| 2. Press the HDMI 1 button on the Panasonic remote. |
| 3. Turn on your laptop's power. |
| 4. If needed, set your laptop to display on a secondary display. |
Don't have an HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
Web camera
A wall mounted web camera is installed at the back of the room to capture video of the front of the room, and a wall mounted microphone array is installed to capture audio. The USB cabe at the instructor's lectern must be connected to your laptop use the camera and microphone.
|
|
| Wall Mounted web camera. | Nureva remote |
Powering Down the Equipment
Press the Power button on the Panasonic remote once to bring up a confirmation dialogue on the projector. Press the Power button a second time to turn off the LCD projector.
To raise the screen, press the up arrow on the wall mounted screen controls.
"No Signal" Auto-Shutdown
When the projector displays the "SHARP Notevision" screen, you have 15 minutes to select your desired source on the Extron. If the projector does not receive a signal after 15 minutes it will shut off automatically. The OFF button on the Extron will then flash as the projector cools down. After 60 seconds the OFF button will be lit solid and the system will be ready to be turned back on.