HS 205

Health Science 205 (PC Lab)- Level 4 Classroom - Seats 30

Powering Up the Equipment
The ceiling-mounted LCD projector is controlled using the Extron Control Panel located on the lectern.   

Press the ON button to turn on the LCD projector. After pressing ON, wait until the button has stopped flashing before selecting the desired source button on the Extron. The projector will not receive the command to switch until after it has finished warming up.

The resident computer, document camera,  DVD/VCR combo unit, and Blu-ray player are all powered on using the appropriate button located on each device, or with their remote controls.

Volume

The adjustment of volume is done using the knob located on the Extron Control Panel.

NOTE: Computers have their own volume controls which may need to be adjusted separately.

Resident Computer @ Lectern

Press the POWER button on the resident computer to turn it on. HS 205 is equipped with a Dell computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the PC button on the Extron to display the image on both the monitor and LCD projector simultaneously.

Document Camera (ELMO)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself.
Once the camera's power is on, press the DOC CAM button on the Extron to display the image on both the monitor and LCD projector simultaneously.
 

Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. HS 205 is equipped with a Dell computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the PC button on the Extron to display the image on both the monitor and LCD projector simultaneously.

Document Camera (Epson ELPDC21)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the DOC CAM button on the Extron.

For more information see Epson DC-13 Document Camera.

Blu-ray or DVD disc Playback (via the Blu-ray player)

Once the equipment is powered up, insert your disc into the Sony Blu-Ray player. The player is controlled using the buttons on the unit or the corresponding DENON remote control provided.

Press the Blu-ray button on the Extron to display the Blu-ray image on the LCD projector.

Press the Blu-ray button on the Extron to display the Blu-ray image on the LCD projector and monitor,

Connecting a Laptop
The HDMI cable needed for connecting a laptop computer is found on the instructor's lectern.  The connection caries both video and audio.  For more information see Selecting HDMI Audio Output. 

Don't have an HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.

Powering Down the Equipment
Press the OFF button on the Extron to turn off the LCD projector.

The resident computer, document camera, and DVD/VCR combo unit must be powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.

 Powering Down the Resident PC

1. Open the Start Menu (click on  in the lower-left corner).

2. Click the "Shut Down" button.