edTPA (Teacher Performance Assessment) Video Recording

edTPA (Teacher Performance Assessment) Video Recording

Overview of the Equipment
The Media Center has ten ZOOM Q2HD Handy Video Recorders for the recording of teacher performance assessment videos. Each kit comes with a ZOOM Q2HD camera and 2 GB SD card (will record roughly up to 30 minutes). The camera requires two AAs.

What Do I Need to Provide?
While a 2 GB SD card is provided, the Media Center recommends that students purchase their own SD card so they can record more content. For instance, a 16 GB SD card can hold four hours of video.

Additionally, students must provide their own batteries.

Where Can I Get a Camera?
The cameras are available for sign-out at the Media Center office (Old Main 425). A valid Canisius ID is required. The listing of cameras and their current availability can be found here.

Basic Instructions for Use

1. Press & hold the POWER button on the side of the camera to turn it on.

Click on the image below to zoom

Power Button


2. See the available recording time, verify that a SD card is loaded (

 will appear), and check the battery life 
 by looking at the top of the camera's video screen. If needed, change the batteries or load a SD card into the side of the camera.

Click on the image below to zoom

 

Click on the image below to zoom

 

Slide the cover down

 

Replace batteries, as needed

 

Click on the image below to zoom

 

Click on the image below to zoom

 

Open the SD card compartment

 

Load the SD card, if needed


3. Press the red RECORD button to being recording. The camera's video screen will now display a red dot 

 in the upper left corner (indicating it is recording) and the remaining recording timer will change to an elasped recording timer and begin counting up.

Click on the image below to zoom

 

Click on the image below to zoom

 

The red RECORD button

 

Arrow button functions while recording


4. While recording, the left and right arrow buttons can be used to zoom in and out. The up and down arrow buttons can be used to adjust the monitoring volume (Please Note: Adjusting the monitoring volume will not impact the record level. The record level is adjusted automatically by the camera, as it should be set to "Meeting" under the INPUT/Auto Gain menu option).

5. Simply press the red RECORD button again to stop the recording.

6. Press & hold the POWER button to turn the camera off.

Additional information on the use of the ZOOM Q2HD Handy Video Recorder can be found in the user guide that comes with each camera. A downloadable version is also available below.

 

 (PDF)

 

 

Below are the recommended settings for recording.

Menu Option

Recommended Setting

VIDEO QUALITY

HD1080/30

CAMERA

On

SCENE

Auto

SOUND QUALITY

AAC 192kbps

MIC ANGLE

120 degrees

INPUT/Lo Cut

Off

INPUT/Auto Gain

Meeting

INPUT/Sound Monitor

Off

SETTING/Set Date

Should already be set to correct day/time

SETTING/Backlight/Brightness

Full

SETTING/Backlight/Power Saving

On

SETTING/HDMI Out

NTSC

SETTING/Battery

Ni-MH


Questions? Visit the FacTS Center's edTPA page.