Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Photos

Click on any image below to zoom
 

OM 401 seats 15 students.

OM 401 is equipped with two chalkboards.

 

Lighting controls, along with a phone,
are located by the wooden TV cabinet.



Old Main 401 - Level 1 Classroom - Seats 15

Equipment Room Features
• 36" Television (in wooden cabinet)
• DVD/VCR combo unit with remote control
 

• Seats 15
• Tablet arm desks (movable)
• Light switches by door and TV
• Phone (wall-mounted by TV)
• Chalkboards (front & side walls)


Powering Up the Equipment
The power for each device must be turned on separately. The TV's power button is the leftmost button on the TV. 

Click on the image below to zoom Click on the image below to zoom

 

Television Television Controls


The power button for the DVD/VCR (labeled ON/STANDBY) is located in the upper left corner of the combo unit.



Volume
The adjustment of volume is done using the VOLUME + and - buttons on the TV


DVD or VHS Tape Playback (via the DVD/VCR combo unit)
Once the equipment is powered up, insert your disc or VHS tape into the Toshiba DVD/VCR combo unit. The combo unit is controlled using the buttons on the unit or the corresponding Toshiba remote control provided.

Click on the image below to zoom Click on the image below to zoom

 

The DVD/VCR combo unit is located
inside the wooden cabinet
 Toshiba DVD/VCR remote control


The TV must be set to input AV1 (below channel 2) to display the DVD/VCR image. To switch between DVD and VCR modes, press the VCR/DVD button found on the combo unit itself.


Powering Down the Equipment
To turn off the equipment, simply press the same two power buttons that you used to power up the equipment.

  • No labels