Photos
| Click on any image below to zoom |
| OM 119 seats 30 students. |
| OM 119 is equipped with one chalkboard. |
| Lighting controls are located next to the door. |
| Additional lighting controls, along with a phone, are located on the wall behind the lectern. |
Old Main 119 (PC Lab) - Level 4 Classroom - Seats 30
| Equipment | Room Features | |
| • Crestron Touch Panel Interface • Ceiling-mounted LCD projector • Windows computer • Document camera (click here for more info) • DVD player • VHS VCR • Ability to connect a presenter's laptop • Auxiliary input (S-video and composite video/audio) • Motorized projection screen | • Seats 30 |
Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch Panel Interface.
| Click on the image below to zoom | Click on the image below to zoom | |
| Instructor's lectern | Crestron Touch Panel |
If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).
After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait. Projector is warming up." Once the warm up message disappears, select your source and your display destination.
The resident computer and document camera are powered on using the appropriate button located on these devices.
Projection Screen
Use the Crestron panel to operate the motorized screen. Up, Down, and Stop buttons are located in the upper-left corner of the touch panel.
A wall switch, located to the left of the phone behind the lectern, can also be used to control the screen.
Volume
Volume is controlled using the Crestron panel. Volume up, down, and mute controls are located in the lower-right corner of the touch panel.
| Click on the image below to zoom |
NOTE: Computers have their own volume controls which may need to be adjusted separately.
Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. OM 119 is equipped with a rack-mounted HP computer. USB ports are located next to the computer's power button.
Once the computer has been powered up, press the COMPUTER button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you to display the image on the monitor & LCD projector (Monitor and Projector) or on just the monitor (Monitor Only).
| Click on the image below to zoom | Click on the image below to zoom | |
| The computer is located in the rack on the right-side of the lectern |
NOTE: You must select a display destination before an image will be displayed. Audio only plays after the View Computer on Monitor and Projector touch-button has been pressed.
Document Camera (ELMO)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.
Once the camera's power is on, press the ELMO CAMERA button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you to display the image on the monitor & LCD projector (View Elmo on Monitor and Projector) or on just the monitor (View Elmo on Monitor Only/Proj. Standby).
| Click on the image below to zoom |
NOTE: You must select a display destination before an image will be displayed.
DVD Playback (via the DVD player)
Press the OPEN/CLOSE button on the DVD player and insert your disc into the disc tray. Press the DVD button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom | Click on the image below to zoom | |
| The DVD player is in the rack |
Touch-buttons are provided which allow you to control the DVD player from the Crestron, as well as choose between displaying the DVD player on the monitor & LCD projector (View on Monitor and Projector) or on just the monitor (View on Monitor Only/Proj. Standby). The only time you ever touch the DVD player itself is to insert or eject your disc.
NOTE: You must select a display destination before an image will be displayed. Audio only plays after the View on Monitor and Projector touch-button has been pressed.
VHS Playback (via the VCR)
Simply insert your tape into the VCR and press the VCR button on the Crestron to display the appropriate touch-screen controls.
| Click on the image below to zoom | Click on the image below to zoom | |
| The VCR is in the rack |
Touch-buttons are provided which allow you to control the VCR from the Crestron, as well as choose between displaying the VCR on the monitor & LCD projector (View on Monitor and Projector) or on just the monitor (View on Monitor Only/Proj. Standby). The only time you ever touch the VCR itself is to insert or eject your tape.
NOTE: You must select a display destination before an image will be displayed. Audio only plays after the View on Monitor and Projector touch-button has been pressed.
Connecting a Laptop
The cables needed for connecting a laptop computer are found on the instructor's table.
| Using the VGA cable |
| 1. Plug the VGA cable into your laptop's VGA port. |
| 2. Plug the Ethernet cable into your laptop's network jack (if needed). |
| 3. Plug the audio cable into your laptop's headphone jack. |
| 4. Press the LAPTOP button on the Crestron. |
| 5. Turn on your laptop's power. |
| 6. If needed, set your laptop to display on a secondary display. |
| Click on the image below to zoom |
Don't have a VGA port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
NOTE: The laptop image will only display on the LCD projector.
Auxiliary Video Inputs
Use the external Audio/Video cables located on the instructor's lectern to display images from a video camera or other external device; S-video and composite audio/video cables are provided.
After connecting your device with the appropriate cables, press either the corresponding S-VIDEO or VIDEO touch-button on the Crestron.
| Click on the image below to zoom |
NOTE: The image will only display on the LCD projector.
Powering Down the Equipment
Press the Room Shutdown button, which is located on the right side of the Crestron panel. Press the "Yes" button to proceed with shutdown or the "No" button to cancel.
The resident computer and document camera are each powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
2. Click the "Shut Down" button.