Page Comparison

Old Main 423 (Case Study Room) - Level 3 Classroom - Seats 49

OM 423 was upgraded in January 2024.  Further details on operation and features will be added shortly.

Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch a Extron Touch Panel Interface.  

If the If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen to power up the projector and enter lower the required Access Code. (Authorized users can request the Access Code from the Help Desk by calling ext. 8340).  

After successfully entering the Access Code, the equipment will power-up and the Crestron will screen.  

While the projector is powering-up the Extron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron will the Extron will display the Main Menu, further identifying the function of the hard-buttons.

.

The resident computer and document camera are powered on using the appropriate button located on each device.

Projection Screen and Room Lighting Controls
Press the SCREEN/LIGHTS button on the Crestron to display the appropriate touch-screen controls.On the left side of of the Extron touch panel under Additional Controls, are buttons to access screen and lighting controls.  Press the Light Controls button to bring up lighting options.  Press the Screen Controls button to bring up controls to raise or lower the screen

Touch-buttons are provided which allow you to select different lighting presets (Full, Medium, Low, and Off) for the room, as well as raise and lower the projection screen.

Wall plates, found by each door and near the phone, can also be used to control the lights. A wall plate for control of the screen is also located by the phone.

Projector Standby (Pic-Mute)
Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, VCR, & DVD) has a Projector Standby button located in On the lower left right corner of the screen. Pressing this button once Extron touch panel is the Projector Standby button.  Pressing this button once will place the projector in standby or picor pic-mute mode. While this mode is active, the button will flash. Simply press the button the button again to take the projector out of standby mode.NOTE: If the projector is in standby mode and you press one of the source buttons (COMPUTER, LAPTOP, DOCUMENT CAMERA, DVD, etc.) the projector will be taken out of standby.

Volume
Press the VOLUME button on the Crestron to display the appropriate touch-screen controls. Volume up, down, and mute controls are provided. Volume
On the right side of the Extron touch panel, are volume controls for the room, as well as a slider indicating the relative volume level.  These allow volume to be raised, lowered or muted respectively.

NOTE: Computers have their own volume controls which may need to be adjusted separately.

Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. OM 423 is OM 423 is equipped with a rack-mounted HP Dell PC computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the COMPUTER button on the Crestron to the Extron to display the appropriate touch-screen controls.

There is Currently an issue with the system switching between the PC and Document Camera.  If the PC does not display, press the button labeled PC on the Extron Branded switcher located in the rack below the PC.

Document Camera (ELMO)
The Doc Cam’s Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

The button on the Crestron touch panel for Doc Cam is not currently functioning.  To view the Doc Cam, select the Computer button, then press the button labeled Doc Cam on the Extron switcher found in the rack below the PCOnce the camera's power is on, press the DOCUMENT CAMERA button on the Extron to display on the projector and monitor.

Blu-ray/DVD Playback   (via the DVD player)
Press the OPEN/CLOSE button on the DVD player and insert your disc into the disc tray. Press the DVD button on the Crestron to Blu-ray Player)

This room is equipped with a Blu-ray player that can play both Blu-ray and DVD discs.

Press the BLU RAY PLAYER button on the Extron to display the appropriate touch-screen controls.   

Touch-buttons are provided which allow you to control the DVD player from the Crestron. The only time you ever touch the DVD player itself is to insert or eject your disc.VHS Playback (via the VCR)
Simply insert your tape into the VCR and press the VCR button on the Crestron to display the appropriate touch-screen controls.   Press the OPEN/CLOSE button on the Blu-Ray player and insert your disc into the disc tray.

Touch-buttons are buttons are provided which allow you to control the VCR from the Crestron. The the Blu-Ray player from the Extron. The only time you ever touch the VCR Blu-Ray player itself is to insert or eject your tapedisc.

Connecting a Laptop
The cables HDMI cable needed for connecting a laptop computer are is found on the instructor’s lectern. In addition to cables for connecting a laptop, a power outlet is also located on the lectern for your convenienceinstructor's podium.  The HDMI connection caries both video and audio.  For more information see Selecting HDMI Audio Output.

 Plug VGA cable VGA  Image Removed

Using the VGA cableHDMI cable
Image Removed
1.	Plug the	HDMI cable into your laptop's	HDMI port.
Image Added
2. Plug the Ethernet cable into your laptop's network jack (if needed).
Image Removed
3. Plug the audio cable into your laptop's headphone jack.
4. Press the LAPTOP button on the Crestron to view the "Laptop" screen.
5 Press the LAPTOP button on the Extron to display on the projector and monitor.
3. Turn on your laptop's power.
64. If needed, set your laptop to display on a secondary display.

Image Removed

Click on the image below to zoom

Don't have a VGA HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.

Auxiliary Video Input
Use the external Audio/Video cables located on the instructor's lectern to display images from a video camera or other external device; S-video and composite audio/video cables are provided.  After connecting your device with the appropriate cables, press the AUX button on the Crestron to display the appropriate touch-screen controls.

Touch-buttons are provided which allow you to select your external device for playback in the room. 

Powering Down the Equipment
Press the SHUTDOWN Shut Down button on the Crestron to display the appropriate touch-screen controlsthe lower left corner of the Extron to bring up the shutdown confirmation. Press the green "Yes" button to proceed with shutdown or the red "No" button to cancel.

Image Removed

The resident computer and document camera are each powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.

Powering Down the Resident PC

1. Open the Start Menu (click on  in the lower-left corner).

2. Click the "Shut Down" button.