...
...
Science Hall 032 (Physics Optics Lab) - Level 2 Classroom - Seats 18 8
Image Modified
| Room Features |
• Crestron Hard-Button Control Panel
• Ceiling-mounted LCD projector
• Ability to connect a presenter's laptop
• Motorized projection screen |
| • Workbenches and chairs
• Light switches by door
• Internet and network access
• Phone (wall-mounted by door)
• Whiteboard (front wall) |
...
Powering Up the Equipment
The equipment is controlled from the flip down shelf using a black multi-button Crestron Control Panel.
| Click on the image below to zoom |
| Click on the image below to zoom |
 Image Modified
|
|  Image Modified
|
| Flip down shelf |
Press the POWER ON button on the Crestron. After pressing POWER ON, wait until the button has stopped flashing before selecting the desired source button on the Crestron. The projector will not receive the command to switch until after it has finished warming up.
...
Connecting a Laptop
The wall plate and cables (VGA, HDMI, and DisplayPort-to-HDMI) needed for connecting a laptop computer are found inside the flip down shelf. In addition to cables for connecting a laptop, a power outlet is also located inside the flip down shelf for your convenience. The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output.
| | | Using the HDMI connection |
| |
|
|
| 1. Plug the VGA cable into the VGA port ("PC IN") on the wall plate inside the flip down shelf. |
| 1. Plug the HDMI cable into the HDMI port ("HDMI IN") on the wall plate inside the flip down shelf. If using the DP-to-HDMI cable, plug the HDMI end into the wall plate.
|
| 2. Plug the VGA cable into your laptop's VGA port. |
| | 3 | |
| | 2. Plug the HDMI cable into your laptop's HDMI port. If using the DP-to-HDMI cable, plug the DisplayPort end into your laptop's DisplayPort.
|
| 3. Plug the appropriate end of the audio cable into the audio jack on the wall plate and the other end into your laptop's headphone jack. |
| |
HDMI | VGA button on the Crestron. |
4 VGA | HDMI button on the Crestron. |
| | | | |
|
| 4. Turn on your laptop's power. |
| 5. Turn on your laptop's power. |
| | |
| Click on the image below to zoom |
 Image Modified
|
Inside the flip down shelf is a wall plate used for
connecting a laptop for display on the LCD projector |
Don't have a VGA or HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
...