...
...
Science Hall 019 (Physics Mechanics Lab) - Level 2 Classroom - Seats 18
Image Modified 8
| | • - Crestron Hard-Button Control Panel
|
• - Ceiling-mounted LCD projectors (x2)
|
• - Ability to connect a presenter's laptop (VGA & HDMI)
|
• - Motorized projection screens (x2)
|
• • Light • - Internet and network access
|
• - Phone (wall-mounted by door)
|
• - Whiteboards (front & back walls)
|
...
Powering Up the Equipment
The equipment is controlled from the flip down shelf using a black multi-button Crestron Control Panel.
| Click on the image below to zoom |
| Click on the image below to zoom |
 Image Modified
|
|  Image Modified
|
Flip | Inside the flip down shelf |
is a Crestron Control Panel, and a wall plate used for
connecting a laptop for display on the LCD projectors. | Crestron Control Panel |
Press the POWER ON button on the Crestron. After pressing POWER ON, wait until the button has stopped flashing before selecting the desired source button on the Crestron. The projectors will not receive the command to switch until after they have finished warming up.
...
Connecting a Laptop
The wall plate and cables (VGA, HDMI, and DisplayPort-to-HDMI) needed for connecting a laptop computer are found inside the flip down shelf. In addition to cables for connecting a laptop, a power outlet is also located inside the flip down shelf for your convenience. The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output.
| | Using the HDMI connection
|
 Image Modified |
| 
Image Removed Image Added
|
| 1. Plug the VGA cable into the VGA port ("PC IN") on the wall plate inside the flip down shelf. |
| 1. Plug the HDMI cable into the HDMI port ("HDMI IN") on the wall plate inside the flip down shelf. If using the DP-to-HDMI cable, plug the HDMI end into the wall plate.
|
 Image Added
|  Image Added
|
| 2. Plug the VGA cable into your laptop's VGA port. |
Image Removed | | | 2. Plug the HDMI cable into your laptop's HDMI port. If using the DP-to-HDMI cable, plug the DisplayPort end into your laptop's DisplayPort. |
Image Added | 3. Press the HDMI button on the Crestron. |
| 3. Plug the appropriate end of the audio cable into the audio jack on the wall plate and the other end into your laptop's headphone jack |
. | | 3. Press the HDMI button on the Crestron | | | 4. Press the VGA button on the Crestron.| Turn on your laptop's power. |
| 5. Turn on your laptop's power. | | |
| | | | | Click on the image below to zoom |
Inside the flip down shelf is a wall plate used for
connecting a laptop for display on the LCD projectorsDon't have a VGA or HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
...
If the projectors do not receive a signal for 15 minutes, the projectors will shut off automatically. The POWER ON button on the Crestron will remain lit and the motorized screens will remain down. Simply press POWER ON to turn the projectors back on or press POWER OFF to properly shut down the equipment and raise the screens.
