| Equipment | Room Features |
|
|
...
| Using the VGA cable | Using the HDMI cable |
1. Plug the VGA cable into your laptop's VGA port. | 1. Plug the HDMI cable into your laptop's HDMI port. |
|
|
2. Plug the audio cable into your laptop's headphone jack. | 2. Press the HDMI/Video button on the Epson remote to select the HDMI 1 input for the projector. |
| |
| 3. Press the Computer button on the Epson remote to select the Computer input for the projector. | 3. Turn on your laptop's power. |
| 4. Turn on your laptop's power. | 4. If the image does not appear, press the 2 button on the switcher. |
| 5. If needed, set your laptop to display on a secondary display. | 5. If needed, set your laptop to display on a secondary display. |
DVD Playback
Press the OPEN/CLOSE button on the DVD player and insert your disc into the disc tray. If you do not see your video, press the HDMI/Video button on the Epson remote to put the projector in HDMI 1, and press the 3 button on the switcher located above the DVD player. Use the playback controls on either the front of the unit or the Sony remote control to play the DVD.
...
The resident computer and DVD player must be powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
2. Click the "Shut Down" button.
...