Page Comparison

Old Main 423 (Case Study Room) - Level 3 Classroom - Seats 49

OM 423 was upgraded in January 2024.  Further details on operation and features will be added shortly.

Powering Up the Equipment
The equipment is controlled from the lectern using a Extron Touch Panel Interface.  

If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen to power up the projector and lower the screen.  

The equipment will powerWhile the projector is powering-up and the Crestron Extron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron Extron will display the Main Menu, further identifying the function of the hard-buttons.

.

The resident computer and document camera are powered on using the appropriate button located on each device.

Projection Screen and Room Lighting Controls
Press the SCREEN/LIGHTS button on the Crestron to display the appropriate touch-screen controls.On the left side of of the Extron touch panel under Additional Controls, are buttons to access screen and lighting controls.  Press the Light Controls button to bring up lighting options.  Press the Screen Controls button to bring up controls to raise or lower the screen

Click on the image below to zoomImage Removed

Touch-buttons are provided which allow you to select different lighting presets (Full, Medium, Low, and Off) for the room, as well as raise and lower the projection screen.

Wall plates, found by each door and near the phone, can also be used to control the lights. A wall plate for control of the screen is also located by the phone.

Projector Standby (Pic-Mute)
Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, VCR, & DVD) has a Projector Standby button located in On the lower left right corner of the screen. Pressing this button once Extron touch panel is the Projector Standby button.  Pressing this button once will place the projector in standby or picor pic-mute mode. While this mode is active, the button will flash. Simply press the button the button again to take the projector out of standby mode.

Volume
NOTE: If the projector is in standby mode and you press one of the source buttons (COMPUTER, LAPTOP, DOCUMENT CAMERA, DVD, etc.) the projector will be taken out of standby.Volume
Press the VOLUME button on the Crestron to display the appropriate touch-screen controls. Volume up, down, and mute controls are provided. On the right side of the Extron touch panel, are volume controls for the room, as well as a slider indicating the relative volume level.  These allow volume to be raised, lowered or muted respectively.

Click on the image below to zoomImage Removed

NOTE: Computers have their own volume controls which may need to be adjusted separately.

Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. OM 423 is equipped with a rack-mounted Dell PC computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the COMPUTER button on the Crestron to the Extron to display the appropriate touch-screen controls.

Image Removed

Click on the image below to zoom	Click on the image below to zoom
Image Removed	Image RemovedImage Added
The computer is located in the rack on the right-side of the lectern		Image Removed
The switcher is located in the rack below the PC.	Press the PC button to display it on the projector and monitor.

Document Camera (ELMO)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the DOCUMENT CAMERA button on the

Extron to display on the projector and monitor.

Blu-ray/DVD Playback (via the Blu-ray Player)

This room is equipped with a Blu-ray player that can play both Blu-ray and DVD discs.

Press the BLU RAY PLAYER button on the Extron to display the appropriate touch-screen controls.  Press the OPEN/CLOSE button on the DVD player and Blu-Ray player and insert your disc into the disc tray. Press the DVD button on the Crestron to display the appropriate touch-screen controls.  

Image Removed

Click on the image below to zoom	Click on an image below to zoom
Image Removed	Image Removed
	Image Added
The DVD Blu-Ray player is located in the rack on in the left-side center of the lectern.

Touch-buttons are buttons are provided which allow you to control the DVD Blu-Ray player from the Crestronthe Extron.  The The only time you ever touch the DVD player itself the Blu-Ray player itself is to insert or eject your disc.

Connecting a Laptop
The HDMI cable needed for connecting a laptop computer is found on the instructor's podium.  The HDMI connection caries both video and audio.  For more information see Selecting HDMI Audio Output.

Image Removed

Click on the image below to zoom

Don't have a HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.

Powering Down the Equipment
Press the SHUTDOWN Shut Down button on the Crestron to display the appropriate touch-screen controlsthe lower left corner of the Extron to bring up the shutdown confirmation. Press the green "Yes" button to proceed with shutdown or the red "No" button to cancel.

Image Removed

The resident computer and document camera are each powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.

Powering Down the Resident PC

1. Open the Start Menu (click on  in the lower-left corner).

2. Click the "Shut Down" button.