Versions Compared

Old Version 6

changes.mady.by.user Nathan Johnson

Saved on

compared with

New Version 7

changes.mady.by.user Nathan Johnson

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Rewrite for complete room overhaul.

No Optical Drive on PC

Please Note: This room's PC does NOT have a DVD drive. If you are planning on playing a DVD, CD, etc. you will need to use the room's DVD or Blu-ray player.
Need to access files saved on a DVD from the computer? You can arrange for use of a portable optical drive by contacting the ITS Help Desk at ext. 8340.

Staff can also provide assistance outside of class time with moving files off a disc to D2L, Google Drive, etc. so you can access the files without needing to use a portable optical drive.

 Photos

Click on any image below to zoom
 

OM 108 seats 16 students.

OM 108 is equipped with two chalkboards.

Lighting controls are located next to the door.

Additional lighting controls, along with a phone, are located on the wall behind the lectern.

Old Main 108 - Level 3 Classroom - Seats 35

MinimizeMaximizeRemove

EquipmentRoom Features
• Crestron Touch Panel Interface
• Ceiling-mounted LCD projector
• Windows computer
• Document camera (click here for more info)
• DVD player
• VHS VCR
• Ability to connect a presenter's laptop
• Auxiliary input (composite audio)
• Pull-down projection screen

• Seats 35 16
• Tablet arm desks (movable)
• Light switches by door & behind lectern
• Internet and network access
• Phone (wall-mounted behind lectern)
• Chalkboards (front & hallway walls)
 

Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch a Extron Control Panel Interface.  

Click on the image below to zoomClick on the image below to zoom

Image RemovedImage Added

Image RemovedImage Added

Instructor's lecternCrestron Touch Panel
If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).  

Image Removed

Image Removed

After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.

Image Removed

Image Removed

  

The resident computer and document camera

Press the On button on the Extron. After pressing ON, the button will blink red for 30 seconds while the projector turns on and warms up.  Wait until the On button turns white before selecting the desired source button on the Extron. The switcher will not receive the command to switch until after it has finished warming up.

The resident computer, document camera, and Blu-Ray player are powered on using the appropriate button located on

these devices

each device.

Projector Standby (

Pic

PIC-

Mute

MUTE)

Some of the source pages (COMPUTER, LAPTOP, & DOCUMENT CAMERA) have Monitor Only and Project Image buttons located in the lower corners of the screen. Pressing the Monitor Only button will

Press the MUTE button on the Extron once to place the projector in standby

or pic-mute

mode.

While this mode is active, the button will flash. Simply press the Project Image button

Simply press the button again to take the projector out of standby

mode

.

Additionally, pressing the PROJECTOR button on the Crestron will bring up independent control of projector standby, which is useful if you need it when using the DVD player or VCR.
Click on the image below to zoom

Image Removed

NOTE: If the projector is in standby mode and you press one of the source buttons (COMPUTER, LAPTOP, DOCUMENT CAMERA, DVD, etc.) the projector will be taken out of standby.

Volume
Press the VOLUME button on the Crestron to display the appropriate touch-screen controls. Volume up, down, and mute controls are provided. 

Click on the image below to zoom

Image Removed

Volume
The adjustment of volume is done using the Volume knob located in the lower-left corner of the Extron. 

NOTE: Computers have their own volume controls which may need to be adjusted separately.


Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on. 

OM 108 is

OM 110 is equipped with a

HP

rack-mounted Dell computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the

COMPUTER

PC button on

the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you to display the image locally (Monitor Only) or through both the monitor and LCD projector simultaneously (Project Image). 

the Extron to display the computer.

Click on the image below to zoom
Click on the image below to zoom

Image Removed

Image Removed

Image Added

The computer is located on
the right shelf of the lectern


Document Camera (ELMOEpson)

The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself.

Click here for more information regarding the document camera found in this classroom

If there is a glowing blue light on the Doc Cam's power button, it is already on. If the light is off, press and release the power button. It will blink a few times before power up is achieved (this will take a few seconds). To turn the lights on on the Doc Cam, use the light switch located on the camera.

Once the camera's power is on, press the DOC CAM button on

the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you

the Extron to display the image

locally (Monitor Only) or through

on both the monitor and LCD projector simultaneously

(Project Image).  

.

For more information see Epson DC-13 Document Camera.  More information on features of the document camera can be found online in its manual by following this link: https://files.support.epson.com/pdf/elpdc21/elpdc21ug.pdf

Click on the image below to zoom

Image RemovedImage Added


Blu-ray/DVD Playback

 

(via the Blu-ray Player)

This room is equipped with a Blu-ray player that can play both Blu-ray and DVD

player)
Press the OPEN/CLOSE button on the DVD player and insert your disc into the disc tray. Press the DVD button on the Crestron to display the appropriate touch-screen controls.  Click on the image below to zoomClick on an image below to zoom

Image Removed

Image Removed

Image Removed

The DVD player is in the rackTouch-buttons are provided which allow you to control the DVD player from the Crestron. The only time you ever touch the DVD player itself is to insert or eject your disc.VHS Playback (via the VCR)
Simply insert your tape into the VCR and press the VCR button on the Crestron to display the appropriate touch-screen controls.  

discs.

  1. Turn on the Blu-ray player using the power button on the player, or on the remote control.
  2. Press the BLU-RAY button on the Extron Control Panel.
  3. The image from the Blu-ray player will now display.
  4. Open the disc tray by using the eject button on the Blu-ray player.  Insert your disc and then press the same button again to close the tray.
  5. Use the remote control to control the playback of your disc.
Image Removed
Click on the image below to zoomClick on an image below to zoom

Image AddedImage Removed


Image Added

Image Removed

The VCR

The Blu-Ray plater is in the rack.

Touch-buttons are provided which allow you to control the VCR from the Crestron. The only time you ever touch the VCR itself is to insert or eject your tape.

Denon Blu-ray player remote control


Connecting a Laptop
The cables HDMI cable needed for connecting a laptop computer are is found on the instructor's lectern (under the hatch). In addition to cables for connecting a laptop, a power outlet is also located under the hatch for your conveniencepodium.  The HDMI connection caries both video and audio.  For more information see Selecting HDMI Audio Output.  Tethered to the HDMI cable is a display port adaptor that you can use if necessary.

 Plug VGA cable VGA 6
Using the VGA cableHDMI cable

Image Removed 1.

Plug the

HDMI cable into your laptop's

HDMI port.


Image Removed Image Added

2

 2. Plug the Ethernet cable into your laptop's network jack (if needed).

Image Added

 Image Removed3

. Plug the audio cable into your laptop's headphone jack.4

. Press the

LAPTOP button on the Crestron to view the "Laptop" screen

HDMI button on the Extron.

5
4. Turn on your laptop's power.
5. If needed, set your laptop to display on a secondary display.
Click on the image below to zoom

Image Removed

Touch-buttons are provided which allow you to display the image locally (Monitor Only) or through both the monitor and LCD projector simultaneously (Project Image).


Don't have a

VGA

HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop

.Auxiliary Audio Input
Use the stereo composite audio jacks located on the instructor's lectern (under the hatch) to play audio from an external device; you must supply your own cables.
After connecting your device with the appropriate cables, press the AUX button on the Crestron to display the appropriate touch-screen controls

.

 Click on the image below to zoom

Image Removed

Powering Down the Equipment
Press the

SHUTDOWN

OFF button on

the Crestron to display the appropriate touch-screen controls. Press the green "Yes" button to proceed with shutdown or the red "No" button to cancel.

Image Removed

Image Removed

the Extron to shut down the projector. 


The resident computer and document camera are each powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.

Powering Down the Resident ComputerImage Removed Powering

Powering Down the Resident Computer

MinimizeImage RemovedMaximizeImage Removed

RemoveImage Modified

1. Open the Start Menu (click on Image Modified in the lower-left corner).

2. Click the "Shut Down" button.