...
...
Science Hall 019 (Physics Mechanics Lab) - Level 2 Classroom - Seats
...
18
...
8
| Equipment | Room Features |
| • Crestron Hard-Button Control Panel • Ceiling-mounted LCD projectors (x2) • Ability to connect a presenter's laptop • Motorized projection screens (x2) | • Workbenches and chairs |
...
Connecting a Laptop
The wall plate and cables (VGA, HDMI, and DisplayPort-to-HDMI) needed for connecting a laptop computer are found inside the flip down shelf. In addition to cables for connecting a laptop, a power outlet is also located inside the flip down shelf for your convenience. The HDMI connection caries both video and audio. For more information see Selecting HDMI Audio Output.
| Using the VGA connection | Using the HDMI connection | |
|
| |
| 1. Plug the VGA cable into the VGA port ("PC IN") on the wall plate inside the flip down shelf. | 1. Plug the HDMI cable into the HDMI port ("HDMI IN") on the wall plate inside the flip down shelf. If using the DP-to-HDMI cable, plug the HDMI end into the wall plate. | |
| 2. Plug the VGA cable into your laptop's VGA port. | ||
| 2. Plug the HDMI cable into your laptop's HDMI port. If using the DP-to-HDMI cable, plug the DisplayPort end into your laptop's DisplayPort. | |
| 3. Plug the appropriate end of the audio cable into the audio jack on the wall plate and the other end into your laptop's headphone jack. | ||
| 4. Press the VGA button on the Crestron. | 3. Press the HDMI button on the Crestron. | |
| 4. Turn on your laptop's power. | ||
| 5. Turn on your laptop's power. | ||
| 5. If needed, set your laptop to display on a secondary display. | ||
| 6. If needed, set your laptop to display on a secondary display. |
...
If the projectors do not receive a signal for 15 minutes, the projectors will shut off automatically. The POWER ON button on the Crestron will remain lit and the motorized screens will remain down. Simply press POWER ON to turn the projectors back on or press POWER OFF to properly shut down the equipment and raise the screens.