Versions Compared

Old Version 5

changes.mady.by.user Nathan Johnson

Saved on

compared with

New Version 6

changes.mady.by.user Nathan Johnson

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Clarified switching instructions, and added doc cam info.

Grupp has been temporality equipped with a PC desktop and document camera to accommodate classroom use.

EquipmentRoom Features
•
  • LCD projector
• Windows
  • Windows laptop
• 
  • Podium with microphone
•
  • Ability to connect a presenter's laptop - HDMI
•
  • Windows Dektop PC
•
  • Document Camera
•
  • Maximum Capacity 40 100 200
•
  • Variable furniture arrangement
• Light
  • Light switches by door
• Internet
  • Internet and network access
•
  • Phone (located in hallway)

•

  •  

...


Powering Up the Equipment
The projector is controlled with the Epson remote control. Press the power button to turn the projector on, then allow the projector time to warm up (approximately 30 seconds).  The PC laptop desktop must be turned on with the power button at the top of the keyboard.  .  All video input to the projector goes through the HDMI switch, located next to the PC on the cart.

Projector Standby
Press the A/V MUTE button on the Epson remote control to black out the projected image.  Simply press the button again to take the projector out of standby mode.

Volume
Computer volume is controlled by the laptop.  On the start bar, to the right side is a volume widget.  Clicking here will allow the volume level to be adjusted up, down, or muted.

Desktop PC

A desktop PC running Windows 10 is installed in Grupp.  To display the desktop:

  1. Power on the desktop PC.
  2. Select the 1 button on the HDMI switch, located next to the PC on the cart.
  3. If the desktop is not displaying, press the VIDEO button on the EPSON remote control until the projector is set to HDMI mode

Connecting a Laptop1.

  1. Plug the HDMI cable into your laptop's HDMI port.  
  2. Select the 2

...

  1. button on the HDMI switch, located next to the PC on the cart.
  2. If the laptop is not displaying, press the VIDEO button on the EPSON remote control until the projector is set to HDMI mode.  

...

  1. If needed, set your laptop to display on a secondary display.

Don't have an HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.

Document Camera

The Doc Cam’s power and lights must be turned on manually using the controls located on the camera itself. Click here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the yellow 3 button on the HDMI switch to display the image on the projector.

Powering Down the Equipment
To turn off the projector, press the Power button on the Epson remote control twice. 

The PC laptop desktop must be powered off separately. Instructions for shutting down the computer are found below.

...