...
| Equipment | Room Features |
|
|
Powering Up the Equipment
The projector and screen are controlled with the wall mounted panels located to the right of the screen on the side wall. Press the ON button to turn the projector on, then allow the projector time to warm up (approximately 30 seconds). The PC laptop must be turned on with the power button at the top of the keyboard. . To improve the projected image, dim the lighting by useing the Preset 1 button on the lighting controls. These are found to the right side of the projection screen.
|
|
| Projector controll panel. | Regis North lighting controls. |
Projector Standby
Press the MUTE button on the wall control panel to black out the projected image. Simply press the button again to take the projector out of standby mode.
Volume
Computer volume is controlled by the laptop or desktop. On the start bar, to the right side is a volume widget. Clicking here will allow the volume level to be adjusted up, down, or muted.
...
- Power on the desktop PC.
- Select the COMPUTER button on the VGA switch location in the podium.
- If the laptop is not displaying, press the PC button on the wall control panel.
|
| VGA switch to display the desktop or laptop on the projector. |
Connecting a Laptop
Regis is equipped with VGA connections to connect a laptop. If your laptop does not have a VGA port, click on Laptop/Tablet Display Adapters to find out what type of adapter is needed to connect your laptop.
...