| Equipment | Room Features |
|
|
...
Powering Up the Equipment
The Projector is controlled from the Epson remote control. Press the ON button to turn the projector on. Allow the projector time to warm up (approximately 30 seconds. The PC and DVD player are located in the equipment Rack underneath the dry erase board at the front of the room, and must be powered up separately. The HDMI switcher can select the PC, DVD player, or HDMI cable automatically when a connected device is powered on, or by selecting the source button for each input. Input 1 selects the PC, 2 the HDMI cable for laptops, and 3 the DVD player.
|
|
|
| Epson projector remote. | Resident PC, DVD player, and HDMI switcher. | The HDMI switcher, 1 for PC, 2 HDMI cable, 3 DVD. |
...
The resident computer and DVD player must be powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
2. Click the "Shut Down" button.
...