Versions Compared

Old Version 4

changes.mady.by.user Nathan Johnson

Saved on

compared with

New Version 5

changes.mady.by.user Nathan Johnson

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Added photos.


EquipmentRoom Features

• LCD projector
• Windows computer w/ wireless keyboard
• DVD player
• Ability to connect a presenter's laptop (HDMI & VGA)

• Seats 16
• Conference Table (non-movable)
• Light switches by door
• Internet and network access
• Phone

• Dry Erase Board

Powering Up the Equipment
The Projector is controlled from the Epson remote control.  Press the ON button to turn the projector on. Allow the projector time to warm up (approximately 30 seconds. The PC and DVD player are located in the equipment Rack underneath the dry erase board at the front of the room, and must be powered up separately.  The .  

Image Added

Image Added

Epson projector remote.Resident PC, DVD player, and HDMI switcher.

The wireless keyboard for the PC can be turned on by moving the power switch on the back of the unit to the on (Green) position.

Image Added

Image Added

Image Added

Wireless keyboard with integrated trackpad.Power switch in the "On" position.Power switch in the "Off" position.

Projector Standby
The projected image can be blacked out using the AV MUTE button on the Sharp remote. Pressing this button will place the projector in standby mode.  Simply press the button again to take the projector out of standby mode.

...

The resident computer and DVD/VHS combo unit must be powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.

 Powering Down the Resident ComputerMinimizeMaximizeRemove

1. Open the Start Menu (click on  in the lower-left corner).

2. Click the "Shut Down" button.

...