| Equipment | Room Features |
• LCD projector | • Seats 16 • Dry Erase Board |
...
| Using the VGA cable | Using the HDMI cable |
1. Plug the VGA cable into your laptop's VGA port. | 1. Plug the HDMI cable into your laptop's HDMI port. |
|
|
2. Plug the Ethernet cable into your laptop's network jack (if needed). | 2. Press the HDMI button on the Epson remote. |
| |
| 3. Plug the audio cable into your laptop's headphone jack. | 3. Turn on your laptop's power. |
| |
| 4. Press the COMPUTER button on the Extron to view the Laptop on the projection screen. | 4. If needed, set your laptop to display on a secondary display. |
| 5. Turn on your laptop's power. | |
| 6. If needed, set your laptop to display on a secondary display. |
...
The resident computer and DVD/VHS combo unit must be powered off separately. Instructions for shutting down the computer are found below.
Be sure to remove any media from the equipment before shutting it down.
Powering Down the Resident Computer
1. Open the Start Menu (click on 
2. Click the "Shut Down" button.
...