Photos
| Click on any image below to zoom |
|
| OM 418 seats |
| 7 students. |
|
| OM 418 is equipped with two chalkboards. |
|
| Lighting controls are located on the wall behind the wooden cabinet. The phone is found on the cabinet. |
Old Main 418 - Level 2 Classroom - Seats
167
| Equipment |
| Room Features | ||
• 52" LCD TV with remote control |
• Seats 7 16 |
Powering Up the Equipment
The power for each device must be turned on separately. The wall-mounted 52" LCD TV is powered on by pressing the POWER button on the Samsung remote control.
| Click on the image below to zoom |
| Click on the image below to zoom | ||
|
| |
| 52" Samsung LCD TV |
| Samsung remote control |
The power button for the DVD/VCR is located in the lower left corner of the combo unit.
Volume
The adjustment of volume is done using the VOL + and - buttons on the Samsung remote control.
NOTE: Computers have their own volume controls which may need to be adjusted separately.
DVD or VHS Tape Playback (via the DVD/VCR combo unit)
Once the equipment is powered up, insert your disc or VHS tape into the JVC DVD/VCR combo unit. The combo unit is controlled using the buttons on the unit or the corresponding JVC remote control provided.
| Click on the image below to zoom |
| Click on the image below to zoom | ||
|
| ||
| The DVD/VCR combo unit is located inside the wooden cabinet |
| JVC DVD/VCR remote control |
The LCD TV must be set to input AV1 to display the DVD/VCR image. Press the SOURCE button on the Samsung remote control until AV1 is highlighted and then press RETURN. To switch between DVD and VCR modes, press the VCR/DVD button found on the combo unit itself.
NOTE: You can use the P. SIZE button on the Samsung remote control to toggle between different aspect ratios. The available picture sizes for the DVD/VCR are: 16:9, Zoom1, Zoom2, 4:3.
Connecting a Laptop
The cables needed for connecting a laptop computer are found on the wooden cabinet beneath the LCD TV.
| Using the VGA cable |
|
| 1. Plug the VGA cable into your laptop's VGA port. |
|
| 2. Plug the audio cable into your laptop's headphone jack. |
| 3. Press the SOURCE button on the Samsung remote control until the LCD TV is set to PC and then press RETURN. |
| 4. Turn on your laptop's power. |
| 5. If needed, set your laptop to display on a secondary display. |
Don't have a VGA port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
NOTE: You can use the P. SIZE button on the Samsung remote control to toggle between different aspect ratios. The available picture sizes for a laptop are: 16:9, 4:3.
Powering Down the Equipment
Press the POWER button on the Samsung remote control to turn the LCD TV off. The DVD/VCR combo unit must be powered off separately.
Be sure to remove any media from the equipment before shutting it down.