Page Comparison

Old Main 119 (PC Lab) - Level 4 Classroom - Seats 30Image Added

Powering Up the Equipment
The equipment ceiling-mounted LCD projector is controlled from the lectern using a Crestron Touch Panel Interface.  

using the Extron Control Panel located
on the lectern.  

The resident computer and document camera are Press the ON button to turn on the LCD projector. After pressing ON, wait until the
projector has warmed up before selecting the desired source button on the Extron. This
should take approximately 15 seconds. The projector will not receive the command to
switch until after it has finished warming up.   

Please allow a second or two after pressing the button for a video source on the
Extron panel for it to display via the projector.

The projection screen should automatically lower when the room is powered up. There
are screen up and down controls on the Extron panel, as well as on the wall behind the
lectern.

If they are not already powered on, the resident computer, document camera, and Blu-ray
player can be powered on using the appropriate button located on these devices.

Projection Screen
Use the Crestron panel to operate the motorized screen. Up, Down, and Stop buttons are located in the upper-left corner of the touch panel.

A wall switch, located to the left of the phone behind the lectern, can also be used to control the screen.

Volume
Volume is controlled using the Crestron panel. Volume up, down, and mute controls are located in the lower-right corner of the touch panel. 

each device, or with
their remote controls (if applicable).

Volume
The adjustment of volume is done using the knob located on the Extron Control Panel.
NOTE: Computers have their own volume controls which may need to be adjusted
separately.

Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on.   OM 119 is equipped
with a rack-mounted an HP computer.  USB USB ports are located next to the computerthe computer's
power button.
Once the computer has been powered up, press the COMPUTER PC button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you the Extron to display the
image on both the monitor & and LCD projector (Monitor and Projector) or on just the monitor (Monitor Only). 

NOTE: You must select a display destination before an image will be displayed. Audio only plays after the View Computer on Monitor and Projector touch-button has been pressed.simultaneously.

Document Camera (ELMO)
 

The Doc Cam's power and lights must be turned on manually using the controls located
on the camera itself. Click here for more information regarding the document camera found in this classroom. If there is a glowing blue light on the Doc Cam's power button, it is
already on. If the light is off, press and release the power button. It will blink a few
times before power up is achieved (this will take a few seconds). To turn the lights on on
the Doc Cam, use the light switch located on the camera.

Once the camera's power is on,   press the ELMO CAMERA DOC CAM button on the Crestron to display the appropriate touch-screen controls. Touch-buttons are provided which allow you the Extron to display the
image on both the monitor & and LCD projector (View Elmo on Monitor and Projector) or on just the monitor (View Elmo on Monitor Only/Proj. Standby). 

NOTE: You must select a display destination before an image will be displayed.simultaneously.

More information on features of the document camera can be found online in its manual
by following this link:
https://files.support.epson.com/pdf/elpdc21/elpdc21ug.pdf

Blu-ray disc or DVD Playback (via the DVD Blu-ray player)
Press the OPEN/CLOSE button on the DVD player and Once the Blu-ray player is powered up, insert your disc into the disc tray. Press the DVD button on the Crestron to display the appropriate touch-screen controls.  

VHS Playback (via the VCR)
Simply insert your tape into the VCR and press the VCR button on the Crestron to display the appropriate touch-screen controls.  

Touch-buttons are provided which allow you to control the VCR from the Crestron, as well as choose between displaying the VCR on the monitor & LCD projector (View on Monitor and Projector) or on just the monitor (View on Monitor Only/Proj. Standby). The only time you ever touch the VCR itself is to insert or eject your tape.
NOTE: You must select a display destination before an image will be displayed. Audio only plays after the View on Monitor and Projector touch-button has been pressed.Connecting a Laptop
The cables DENON Blu-Ray player.
The player is controlled using the buttons on the unit or the corresponding DENON
remote control provided.

Press the Blu-ray button on the Extron to display the Blu-ray image on the LCD projector.

Conecting a Laptop
The HDMI cable needed for connecting a laptop computer are is found on the instructor's table.

Powering Down the Equipment
Press the Room Shutdown button, which is located on the right side of the Crestron panel. Press the "Yes" button to proceed with shutdown or the "No" button to cancel.  

The resident computer and document camera are each powered off separately. Instructions for shutting down the computer are found below.
Be sure
lectern, next to the Extron control panel. There is an adaptor tethered to the HDMI cable
that can be used if your computer has a Display Port connection instead of an HDMI
connection.

Once the HDMI cable is connected to your laptop directly or via an adaptor, press the
HDMI button on the Extron to display your computer.

Powering Down the Projector
Press the OFF button on the Extron to turn off the LCD projector.
Be sure to remove any media from the equipment before shutting it down.

 Powering Down the Resident ComputerImage AddedImage Added

1. Open the Start Menu (click on  in the lower-left corner).

2. Click the "Shut Down" button.