Koessler Athletic Center G19 - Level 3 - Research Lab
...
Connecting a Laptop
The cables needed for connecting a laptop computer are found on the instructor's lectern. In addition to cables for connecting a laptop, power outlets are also located on the lectern for your convenience.
Using the VGA cable |
1. Plug Plug the VGA cable into your laptop's VGA port. |
|
2. Plug Plug the audio cable into your laptop's headphone jack. |
|
3. Press the LAPTOP button on the Extron. |
4. Turn on your laptop's power. |
5. If needed, set your laptop to display on a secondary display. |
...
"No Signal" Auto-Shutdown
The projector will display the following image when it is not receiving a signal from one of the available sources (resident computer, document camera, DVD/VCR, etc.). This happens because either the source itself is turned off or, in the case of a laptop, not set to display its image on the projector.
"No Signal" Screen |
After displaying the above image for 15 minutes the projector will shut off automatically. |
...