Science Hall 1025 (Pre-Med) - Seats 10
...
| Click on the image below to zoom | Click on the image below to zoom | |
|
| |
| Conference table | Crestron Touch Panel |
If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).
|  |
After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...TV Powering On." Once the LCD TV is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.
|
|
The Blu-ray player is powered on using the appropriate button located on the device.
...
| Click on the image below to zoom | Click on the image below to zoom | |
|
| |
| The Blu-ray player is located in the rack found in the credenza |
...
| Using the VGA cable | Using the HDMI cable | |
|
| |
| 1. Plug the VGA cable into your laptop's VGA port. | 1. Plug the HDMI cable into your laptop's HDMI port. | |
| | |
| 2. Plug the Ethernet cable into your laptop's network jack (if needed). | 2. Plug the Ethernet cable into your laptop's network jack (if needed). | |
| ||
| 3. Plug the audio cable into your laptop's headphone jack. | 3. Press the LAPTOP button on the Crestron to view the "Podium Laptop" screen. | |
| 4. Press the LAPTOP button on the Crestron to view the "Podium Laptop" screen. | 4. Press the "Digital (HDMI) Laptop" touch-button. | |
| 5. Press the "Analog (VGA) Laptop" touch-button. | 5. Turn on your laptop's power. | |
| 6. Turn on your laptop's power. | 6. If needed, set your laptop to display on a secondary display. | |
| 7. If needed, set your laptop to display on a secondary display. | ||
...
| Click on the image below to zoom |
|
Don't have a VGA or HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.
...
| Click on the image below to zoom |
|
...
Powering Down the Equipment
Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the "Yes, Shutdown" button to proceed with shutdown or the "No, Go Back" button to cancel.
|
|
The Blu-ray player must be powered off separately. Be sure to remove any media from the equipment before shutting it down.
...